When compression is needed with a fracture repair the screw must be placed accurately within the compression hole of the Dynamic Compression Plate (DCP).
The load neutral guide has a compression and a neutral end so when compression is required the tip of the compression guide its into the DCP hole and guides the drill so the hole is in the precise place which will provide the desired compression when the screw is placed. If no compression is needed simply use the neutral end of the drill guide.


Load/Neutral Drill Guide for 1.5mm Compression Plates
£132.00

When compression is needed with a fracture repair the screw must be placed accurately within the com.....

Load/Neutral Drill Guide for 2.0mm Compression Plates
£132.00

When compression is needed with a fracture repair the screw must be placed accurately within the com.....

Load/Neutral Drill Guide for 2.4mm Compression Plates
£132.00

When compression is needed with a fracture repair the screw must be placed accurately within the com.....

Load/Neutral Drill Guide for 2.7mm Compression Plates
£132.00

When compression is needed with a fracture repair the screw must be placed accurately within the com.....

Load/Neutral Drill Guide for 3.5mm Compression Plates
£132.00

When compression is needed with a fracture repair the screw must be placed accurately within the com.....

Load/Neutral Drill Guide for 4.5mm Compression Plates
£132.00

When compression is needed with a fracture repair the screw must be placed accurately within the com.....

Load/Neutral Drill Guide for 5.5mm Compression Plates
£132.00

When compression is needed with a fracture repair the screw must be placed accurately within the com.....