This section of our catalogue contains our Locking Screws and Plates. Locking technology is different from using standard cortical screws and plates as with cortical ixation the plate is trapped between the head of the screw and the bone and it is held in place by the threads of the screw in the bone. This means the cortical plates have to be properly contoured because if they are not then as the screws are tightened they will exert uneven forces on the plate and create areas of stress.

With locking technology the threads of the screw engage the bone but the plate is held in place by the threads in the head of the screw which engage with the threads in the hole of a locking plate, therefore securing the plate in place. The locking plate requires little, if any, contouring because the screw tightens into the plate and not onto the bone so the plate almost acts like the connecting bar in an an external fixatior.

If a locking plate is contoured then locking plugs should be put into the surrounding locking holes to protect them. A dedicated drill guide, which locks into the plate hole, must be used when drilling the holes to ensure the screw isn’t angled because any angulation will affect the screw head and plate interface.

Following a number of requests we have also introduced Star (Torx) Head Locking Screws so you now have the option of Hex Head or Star (Torx) Head.

Stacked Locking holes will accept cortical screws but there is rarely a need to use them in a locking plate unless a small angulation is desired, which can’t be done with a standard locking plate and screw. Our locking plates also have the Limited Contact notches on the underside of the plate.

Refine Search


2.4mm Cortical Self-Tapping Screw x 14mm
£5.80

Cortical Self-Tapping screws have 1-3 self-tapping lutes in the tip of the screw so the screw cuts.....

2.4mm Cortical Self-Tapping Screw x 16mm
£5.80

Cortical Self-Tapping screws have 1-3 self-tapping lutes in the tip of the screw so the screw cuts.....

2.4mm Cortical Self-Tapping Screw x 22mm
£7.10

Cortical Self-Tapping screws have 1-3 self-tapping lutes in the tip of the screw so the screw cuts.....

2.4mm Cortical Self-Tapping Screw x 28mm
£7.60

Cortical Self-Tapping screws have 1-3 self-tapping lutes in the tip of the screw so the screw cuts.....

2.4mm Cortical Self-Tapping Screw x 32mm
£8.00

Cortical Self-Tapping screws have 1-3 self-tapping lutes in the tip of the screw so the screw cuts.....

2.4mm Cortical Self-Tapping Screw x 34mm
£8.60

Cortical Self-Tapping screws have 1-3 self-tapping lutes in the tip of the screw so the screw cuts.....

2.4mm Cortical Self-Tapping Screw x 40mm
£9.10

Cortical Self-Tapping screws have 1-3 self-tapping lutes in the tip of the screw so the screw cuts.....

2.4mm Locking Drill Guide - 30mm
£50.40

It is important to use a dedicated drill guide when using a locking system to ensure the pre-drill.....

2.4mm Locking Screws - Hex Head x 10mm
£12.50

Locking screws are self-tapping screws that have a threaded screw head and this thread engages wit.....

2.4mm Locking Screws - Hex Head x 12mm
£13.20

Locking screws are self-tapping screws that have a threaded screw head and this thread engages with .....

2.4mm Locking Screws - Hex Head x 14mm
£13.20

Locking screws are self-tapping screws that have a threaded screw head and this thread engages wit.....

2.4mm Locking Screws - Hex Head x 16mm
£13.20

Locking screws are self-tapping screws that have a threaded screw head and this thread engages wit.....

2.4mm Locking Screws - Hex Head x 18mm
£13.70

Locking screws are self-tapping screws that have a threaded screw head and this thread engages wit.....

2.4mm Locking Screws - Hex Head x 20mm
£13.70

Locking screws are self-tapping screws that have a threaded screw head and this thread engages wit.....

2.4mm Locking Screws - Hex Head x 22mm
£14.50

Locking screws are self-tapping screws that have a threaded screw head and this thread engages with .....

2.4mm Locking Screws - Hex Head x 24mm
£14.70

Locking screws are self-tapping screws that have a threaded screw head and this thread engages with .....

2.4mm Locking Screws - Hex Head x 26mm
£15.10

Locking screws are self-tapping screws that have a threaded screw head and this thread engages with .....

2.4mm Locking Screws - Hex Head x 28mm
£15.30

Locking screws are self-tapping screws that have a threaded screw head and this thread engages with .....

2.4mm Locking Screws - Hex Head x 30mm
£15.80

Locking screws are self-tapping screws that have a threaded screw head and this thread engages with .....

2.4mm Locking Screws - Hex Head x 32mm
£16.00

Locking screws are self-tapping screws that have a threaded screw head and this thread engages with .....

Strictly Necessary

These cookies are required for our website to operate and include items such as whether or not to display this pop-up box or your session when logging in to the website. These cookies cannot be disabled.

Performance

We use 3rd party services such as Google Analytics to measure the performance of our website. This helps us tailor the site content to our visitors needs.

Functional

From time to time, we may use cookies to store key pieces of information to make our site easier for you to use. Examples of this are remebering selected form options to speed up future uses of them. These cookies are not necessary for the site to work, but may enhance the browsing experience.

Targeting

We may use advertising services that include tracking beacons to allow us to target our visitors with specific adverts on other platforms such as search or social media. These cookies are not required but may improve the services we offer and promote.

Change Settings

Welcome. You can control how we use cookies and 3rd party services below

Change Settings Accept
Learn how we use cookies